Products

All categories



TY-CNT10CU20Ca10GO30

Categories:Carbon Nanotube Copper/Aluminum Platinum Heat Dissipation Applications
Time of issue:2020-06-17 00:00:00
Views:0

Description:

Information

PRODUCTION

This product is aqueous solution of carbon nanotube material after special dispersion technology, rational use of the conductivity of carbon nanotube material, electromagnetic shielding. The thermal conductivity, far-infrared thermal radiation and high thermal conductivity after combining with copper and platinum, which are coated on the surface of copper and platinum through a special treatment process, have The special laminating process and the multi-layer combination of graphene materials combine Graphene heat dissipation function and nano carbon tube thermal radiation clever combination. Strong adhesion and holding force for plasma LCD display, computer and peripheral devices, mobile phone, shielded cable and other electronic products. The EMI, EMS conductive shield.

Product Diagram

SUBSTRATE
1	ARTICLE NAME	thickness（mm）	Specification name	Test Method	reference standard
	Carbon nanotubesCNT	0.01mm ±0.003mm	Single fiber thermal conductivity ﹥1200W/m.k	TEM/TC	JY/T011-1996 Transmission Electron Microscopy Method Flux
			volume resistance﹤500mΩ.cm	micro-resistance meter	JY/120-1997 Method of determining resistivity of carbon materials
2	copper-platinum layer	0.010mm ±0.002mm	radical (chemistry)（g/m2） 162 ±5%	national standard	GB/T5230-1995
			Mass resistivity ≦0.162Ω.g㎡
3	NanographeneGO	0.03mm ±0.005	monoatomic thermal conductivity - 800W/m.k	TEM/TC	JY/T011-1996 Transmission Electron Microscope Method General Measurement
			volume resistance﹤35mΩ.cm	micro-resistance meter	JY/120-1997 Method of determining resistivity of carbon materials
	copper-platinum layer	0.01mm ±0.002mm	radical (chemistry)（g/m2） 162 ±5%	national standard	GB/T5230-1995
			Mass resistivity ≦0.162Ω.g㎡
	导热胶	0.01mm ±0.002mm	radical (chemistry)（g/m2）		ASTM D3330
			1000g/m2±200g/m2	/
4	PET Release Film	0.075mm ±0.01mm	stripping ratio 5g/25mm	/	/
PRODUCTION THCKNESS		0.075mm±0.005mm	COLOR	Black on one side.
			SMOOTHNESS	GOOD

product category

Annexes：

DH120 CNT Coating Description

Product composition: aqueous resin, inorganic fillers and additives

Molding process: scraping and coating

trademark	appearance	solid（%）	Viscosity (Tu-4)	stiffness	water resistance	Square resistors
DH120	black	20±1	22-26S	HB	soak24H	10^3-10^4

* Data given are typical values, non-production data

Use and Storage

Before construction, it is necessary to clean the surface oil of the substrate before coating or spraying.

Storage conditions: 5~35℃, do not expose to sunlight and freeze.

Remarks:

1. Test conditions are 23℃±2℃ and relative humidity 65%±5%.

2. The storage temperature is 23℃±15℃. The storage environment should be cool and dry, avoid direct sunlight. Avoid direct sunlight, freezing and high temperature.

3. The validity period is 6 months.

The surface should be clean, smooth, dry and free from oil or other pollutants.

Scan the QR code to read on your phone

Sincerely welcome all kinds of people at home and abroad to visit our company, inspection. Our company will provide fast and accurate service with the attitude of a sincere customer.

Products

Artificial Graphite

Natural graphite

Thermal insulation ceramics

Coating of adhesive products

Aerogel

Contact

Add：A5-5, Auto Parts Industrial Park, No.1258 Jinfeng South Road, Wuzhong District, Suzhou

Tel：0512-66939426

Fax：0512-66234776

E-MAIL: sztygs@sztygs.cn

View mobile version